Contents
How to Enter Sitecom Router WEB GUI?
The most commonly used IP to enter the Sitecom WEB GUI is 192.168.0.1. Open a web browser, as shown in the image below.
When the page opens, you’ll need to write your router’s username and password.
⬇
Sitecom Router LOGIN
If you haven’t changed your password already, you can find your password on a sticker located under the router or in the user manual. If you cannot find a sticker or the user manual, you might like to take a look at our “Default Sitecom Router Passwords” list.
Sitecom Router Username & Passwords
The populer default Sitecom Router Passwords are listed below. There is also another list of the passwords of every Sitecom router model at the bottom of the page.
| IP Address | Username | Password |
|---|---|---|
| 192.168.0.1 | admin | admin |
| 192.168.0.1 | – | admin |
| 192.168.0.1 | ‘randomly generated” | admin |
| 192.168.1.254 | sitecom | sitecom |
Changing Sitecom WiFi Password
If your neighbors are using your internet without even asking for permission, you can always put an end to this by simply changing your router’s WiFi password. Periodically changing the password of your wireless connection is significant for your security.
How to Change Sitecom WiFi Password?
- Log into the router
- Click “Wireless Settings”
- SSID is your WiFi name. You can change the name of your router from here.
- SSID Password is your WiFi password. You can change your password from here.
- Your password should have 8 characters.
- Click “Save” after changing your password.
After changing your Sitecom WiFi password, your router will restart. To connect the router, you’ll need to enter your new password on your devices, such as PC or mobile.
I can’t connect to my Sitecom router’s admin interface?
If you receive the error message: “Can’t reach this page,” then you may be trying the wrong IP address.
How do I find the IP address of my Sitecom router?
192.168.0.1 may not be your router’s IP address. To learn your router’s default IP address, you can refer to the label on the bottom of your modem or, if available, the modem’s user manual. If you don’t have either of those, you can try the following steps and learn your router’s default IP address.
The most used IP addresses by Sitecom routers;
- 192.168.0.1
- 192.168.1.254
In Windows: Type “cmd” in the search bar and click “Command Prompt.” Now, type “ipconfig” and press enter. You’ll see your router’s WEB GUI password next to “Default Gateway.” In the example image below; “Default Gateway . . . . . : 192.168.0.1 is the IP address.
In MacBook: Type “route -n get default” in Terminal. You’ll see your router’s WEB GUI IP address next to “Gateway.”
How to Reset Sitecom Router?
You’ll need your GUI password to change the WiFi password. If you have already changed your Sitecom router’s WEB GUI password and don’t remember that password, you’ll need to reset your router.
Attention: After the reset, your router will restore factory settings. All passwords and configurations you have set will be gone. Your internet connection will drop and you’ll need to reconfigure the router.
Sitecom router Hard Factory Reset
Important: Your Sitecom router should be plugged in and working, and its lights must be on.
- Find the reset button behind your Sitecom router.
- Use a pin or another sharp-pointed object (like a pen or toothpick) to press and hold on to the reset button for about 10-15 seconds.
- Your router’s lights will flash.
- Wait until all of your Sitecom router’s lights are on.
- Congrats! You successfully reset your Sitecom router.
Default Sitecom Router Password List
| Model | Username / Password | IP Address |
|---|---|---|
| Greyhound v1 | – | |
| Greyhoundv1 001 | – | |
| WL-106 | 192.168.0.1 | |
| WL-111 | – | |
| WL-122 | sitecom / sitecom | 192.168.1.254 |
| WL-183 | admin / admin | 192.168.0.1 |
| WL-304 | admin / admin | 192.168.0.1 |
| WL-304v1 001 | admin / admin | 192.168.0.1 |
| WL-304v1 (001) | admin / admin | 192.168.0.1 |
| WL-306 | admin / admin | 192.168.0.1 |
| WL-306v1 001 | admin / admin | 192.168.0.1 |
| WL-308 | admin / admin | 192.168.0.1 |
| WL-308v1 001 | admin / admin | 192.168.0.1 |
| WL-309 | admin / admin | 192.168.0.1 |
| WL-309v1 001 | admin / admin | 192.168.0.1 |
| WL-309v1 (001) | admin / admin | 192.168.0.1 |
| WL-351 v1 002 | admin / admin | 192.168.0.1 |
| WLR-6000 | – / admin | 192.168.0.1 |
| WLR-6100 | 192.168.0.1 | |
| WLR-6100v1 | – / admin | 192.168.0.1 |
| WLR-6100v1 – 001 | – | |
| WLR-7100 | ‘randomly generated” / admin | 192.168.0.1 |
| WLR-7100v1 – 001 | ‘randomly generated” / admin | 192.168.0.1 |
| WLR-8100 | 192.168.0.1 | |
| WLR-8100v1 – 001 | ‘randomly generated” / admin | 192.168.0.1 |
| WLR-8200 | 192.168.0.1 | |
| WLR-8200v1 001 | 192.168.0.1 | |
| WLR-8200v1 (001) | 192.168.0.1 | |
| WLR-9000 | 192.168.0.1 | |
| WLR-9000v1 001 | – / admin | 192.168.0.1 |
| WLR-9100 (Greyhound) v1 | – | |
| WLR-9500 | 192.168.0.1 | |
| WLR-9500v1 001 | – / admin | 192.168.0.1 |
Last Updated on: 13 March 2022