10.0.0.1 is a special IP address used to install a router and configure its settings. You can find the answers to “How To Access 10.0.0.1 Router Login Page? What are the router passwords?” and such questions in this article. Router brands usually use the IP addresses 192.168.1.1 – 192.168.0.1 for settings page entry.
⬇
10.0.0.1 LOGIN
What can you do in the router GUI?
- Install the router.
- Change the name and password of the WiFi.
- View the connected devices.
- Secure the router.
- Restart the router.
- And many more things.
What do I need to enter 10.0.0.1 router GUI?
- A working router.
- A PC, mobile phone, or tablet to connect the router.
- Router WiFi password.
- If you don’t know the WiFi password, you’ll need an ethernet cable and a PC.
If your router’s IP address is 10.0.0.1, you can follow the steps below to log into the settings page of your router.
10.0.0.1: How to Enter Router Interface?
Tip: To enter the router interface, you need to connect to the router either through WiFi or an ethernet cable. Don’t go to the next step without connecting to the router.
To enter the router GUI, type 10.0.0.1 and press enter, just as shown in the image below.
When the page opens, you’ll need to type your router’s username and password.
If the password hasn’t been changed, you can find it on the sticker located under your router or in the user manual. If you don’t have either of them, you should take a look at our “10.0.0.1: The Most Commonly Used Router Passwords” list.
10.0.0.1: The Most Commonly Used Router Passwords
If you haven’t changed your GUI password before, 10.0.0.1 Passwords will work. If you have changed your password and don’t remember it, then you should check our article on how to reset a router.
| Default Router Passwords | ||
|---|---|---|
| IP Address | Username | Password |
| 10.0.0.1 | admin
admin admin cusadmin Cisco highspeed |
password
admin none highspeed Cisco cusadmin |
10.0.0.1: I cannot Enter Router Settings Page
1st possibility
The address bars of browsers (Google Chrome, Firefox, Opera) are also used by search engines (Google, Yandex, Bing). When you type 192.168 to enter the router settings page, you’ll see different IP suggestions. And these suggestions will lead you to the results page rather than the GUI. You’ll need to type the correct IP address ignoring the suggestions and without misspellings.
Correct:
Wrong:
2st possibility
10.0.0.1 may not be your router’s IP address. To learn your router’s default IP address, you can refer to the label on the bottom of your modem or, if available, the modem’s user manual. If you don’t have either of those, you can try the following steps and learn your router’s default IP address.
In Windows: Type “cmd” in the search bar and click “Command Prompt.” Now, type “ipconfig” and press enter. The IP address next to “Default Gateway” is the interface login IP address of your modem. In the example image below; “Default Gateway . . . . . : 10.0.0.1 is the IP address.
In MacBook: Type “route -n get default” in Terminal. You’ll see your router’s WEB GUI IP address next to “Gateway.”
Default Router Password List for 10.0.0.1
| Brand / Model | Username / Password |
|---|---|
| TG1682G | admin / password |
| TG1682GER1 | admin / password |
| Cisco/881-W | Cisco / Cisco |
Router Brands That Use 10.0.0.1
Last Updated on: 11 February 2022