Contents
How to Enter ZTE Router WEB GUI?
The most commonly used IP to enter the ZTE WEB GUI is 192.168.1.1. Open a web browser, as shown in the image below.
When the page opens, you’ll need to write your router’s username and password.
⬇
ZTE Router LOGIN
If you haven’t changed your password already, you can find your password on a sticker located under the router or in the user manual. If you cannot find a sticker or the user manual, you might like to take a look at our “Default ZTE Router Passwords” list.
ZTE Router Username & Passwords
The populer default ZTE Router Passwords are listed below. There is also another list of the passwords of every ZTE router model at the bottom of the page.
IP Address | Username | Password |
---|---|---|
192.168.0.1 | admin | admin |
192.168.1.1 | 1admin0 | ltecl4r0 |
192.168.1.1 | ltecl4r0 | 1admin0 |
192.168.0.1 | – | admin |
Changing ZTE WiFi Password
If your neighbors are using your internet without even asking for permission, you can always put an end to this by simply changing your router’s WiFi password. Periodically changing the password of your wireless connection is significant for your security.
How to Change ZTE WiFi Password?
- Log into the router
- Click “Wireless Settings”
- SSID is your WiFi name. You can change the name of your router from here.
- SSID Password is your WiFi password. You can change your password from here.
- Your password should have 8 characters.
- Click “Save” after changing your password.
After changing your ZTE WiFi password, your router will restart. To connect the router, you’ll need to enter your new password on your devices, such as PC or mobile.
I can’t connect to my ZTE router’s admin interface?
If you receive the error message: “Can’t reach this page,” then you may be trying the wrong IP address.
How do I find the IP address of my ZTE router?
192.168.1.1 may not be your router’s IP address. To learn your router’s default IP address, you can refer to the label on the bottom of your modem or, if available, the modem’s user manual. If you don’t have either of those, you can try the following steps and learn your router’s default IP address.
The most used IP addresses by ZTE routers;
- 192.168.1.1
- 192.168.0.1
In Windows: Type “cmd” in the search bar and click “Command Prompt.” Now, type “ipconfig” and press enter. You’ll see your router’s WEB GUI password next to “Default Gateway.” In the example image below; “Default Gateway . . . . . : 192.168.1.1 is the IP address.
In MacBook: Type “route -n get default” in Terminal. You’ll see your router’s WEB GUI IP address next to “Gateway.”
How to Reset ZTE Router?
You’ll need your GUI password to change the WiFi password. If you have already changed your ZTE router’s WEB GUI password and don’t remember that password, you’ll need to reset your router.
Attention: After the reset, your router will restore factory settings. All passwords and configurations you have set will be gone. Your internet connection will drop and you’ll need to reconfigure the router.
ZTE router Hard Factory Reset
Important: Your ZTE router should be plugged in and working, and its lights must be on.
- Find the reset button behind your ZTE router.
- Use a pin or another sharp-pointed object (like a pen or toothpick) to press and hold on to the reset button for about 10-15 seconds.
- Your router’s lights will flash.
- Wait until all of your ZTE router’s lights are on.
- Congrats! You successfully reset your ZTE router.
Default ZTE Router Password List
Model | Username / Password | IP Address |
---|---|---|
MF10 | admin / admin | 192.168.0.1 |
MF28B | – | |
MF28D | – | |
MF28G | – | |
WF820+ | 1admin0 / ltecl4r0 | 192.168.1.1 |
WF820#ERROR! | ltecl4r0 / 1admin0 | 192.168.1.1 |
ZXDSL 931WII V1 | admin / admin | 192.168.1.1 |
ZXHN H108Nv1.x | admin / admin | – |
ZXHN H108N v2 | – | |
ZXHN H108Nv2.5 | – | |
ZXHN H118Na v2.3 | – / admin | 192.168.0.1 |
ZXHN H118Nv2.3 | – | |
ZXHN H389A | – | |
ZXV10H108N(v2 ?) | – | |
ZXV10 H618B | – | |
ZXV10 H618BE8 | – | |
ZXV10 W300E | – |
Last Updated on: 13 March 2022