Contents
- How to Enter Cellvision Router WEB GUI?
- Cellvision Router LOGIN
- Cellvision Router Username & Passwords
- Changing Cellvision WiFi Password
- I can’t connect to my Cellvision router’s admin interface?
- How do I find the IP address of my Cellvision router?
- How to Reset Cellvision Router?
- Default Cellvision Router Password List
How to Enter Cellvision Router WEB GUI?
The most commonly used IP to enter the Cellvision WEB GUI is 192.168.1.1. Open a web browser, as shown in the image below.
When the page opens, you’ll need to write your router’s username and password.
⬇
Cellvision Router LOGIN
If you haven’t changed your password already, you can find your password on a sticker located under the router or in the user manual. If you cannot find a sticker or the user manual, you might like to take a look at our “Default Cellvision Router Passwords” list.
Cellvision Router Username & Passwords
The populer default Cellvision Router Passwords are listed below. There is also another list of the passwords of every Cellvision router model at the bottom of the page.
Changing Cellvision WiFi Password
If your neighbors are using your internet without even asking for permission, you can always put an end to this by simply changing your router’s WiFi password. Periodically changing the password of your wireless connection is significant for your security.
How to Change Cellvision WiFi Password?
- Log into the router
- Click “Wireless Settings”
- SSID is your WiFi name. You can change the name of your router from here.
- SSID Password is your WiFi password. You can change your password from here.
- Your password should have 8 characters.
- Click “Save” after changing your password.
After changing your Cellvision WiFi password, your router will restart. To connect the router, you’ll need to enter your new password on your devices, such as PC or mobile.
I can’t connect to my Cellvision router’s admin interface?
If you receive the error message: “Can’t reach this page,” then you may be trying the wrong IP address.
How do I find the IP address of my Cellvision router?
192.168.1.1 may not be your router’s IP address. To learn your router’s default IP address, you can refer to the label on the bottom of your modem or, if available, the modem’s user manual. If you don’t have either of those, you can try the following steps and learn your router’s default IP address.
The most used IP addresses by Cellvision routers;
In Windows: Type “cmd” in the search bar and click “Command Prompt.” Now, type “ipconfig” and press enter. You’ll see your router’s WEB GUI password next to “Default Gateway.” In the example image below; “Default Gateway . . . . . : 192.168.1.1 is the IP address.
In MacBook: Type “route -n get default” in Terminal. You’ll see your router’s WEB GUI IP address next to “Gateway.”
How to Reset Cellvision Router?
You’ll need your GUI password to change the WiFi password. If you have already changed your Cellvision router’s WEB GUI password and don’t remember that password, you’ll need to reset your router.
Attention: After the reset, your router will restore factory settings. All passwords and configurations you have set will be gone. Your internet connection will drop and you’ll need to reconfigure the router.
Cellvision router Hard Factory Reset
Important: Your Cellvision router should be plugged in and working, and its lights must be on.
- Find the reset button behind your Cellvision router.
- Use a pin or another sharp-pointed object (like a pen or toothpick) to press and hold on to the reset button for about 10-15 seconds.
- Your router’s lights will flash.
- Wait until all of your Cellvision router’s lights are on.
- Congrats! You successfully reset your Cellvision router.
Default Cellvision Router Password List
| Model | Username / Password | IP Address |
|---|---|---|
| PRS-201WU | – |
Last Updated on: 13 March 2022