Aztech Router Login

3 min read

How to Enter Aztech Router WEB GUI?

The most commonly used IP to enter the Aztech WEB GUI is 192.168.1.1. Open a web browser, as shown in the image below.

192.168.1.1
Press the “Enter”

When the page opens, you’ll need to write your router’s username and password.
Aztech Router Login
There is a sample interface for router login. Remember to check your username and password should start with a lowercase letter.
If you haven’t changed your password already, you can find your password on a sticker located under the router or in the user manual. If you cannot find a sticker or the user manual, you might like to take a look at our “Default Aztech Router Passwords” list.

Aztech Router Username & Passwords

The populer default Aztech Router Passwords are listed below. There is also another list of the passwords of every Aztech router model at the bottom of the page.
IP Address Username Password
192.168.1.1 admin admin

Changing Aztech WiFi Password

If your neighbors are using your internet without even asking for permission, you can always put an end to this by simply changing your router’s WiFi password. Periodically changing the password of your wireless connection is significant for your security.
How to Change Aztech WiFi Password?

  • Log into the router
  • Click “Wireless Settings”
  • SSID is your WiFi name. You can change the name of your router from here.
  • SSID Password is your WiFi password. You can change your password from here.
  • Your password should have 8 characters.
  • Click “Save” after changing your password.
After changing your Aztech WiFi password, your router will restart. To connect the router, you’ll need to enter your new password on your devices, such as PC or mobile.

I can’t connect to my Aztech router’s admin interface?

If you receive the error message: “Can’t reach this page,” then you may be trying the wrong IP address.
192.168.1.1192.168.1.1

How do I find the IP address of my Aztech router?

192.168.1.1 may not be your router’s IP address. To learn your router’s default IP address, you can refer to the label on the bottom of your modem or, if available, the modem’s user manual. If you don’t have either of those, you can try the following steps and learn your router’s default IP address.
The most used IP addresses by Aztech routers;

  • 192.168.1.1
  • 192.168.2.1
  • 10.0.0.1
In Windows: Type “cmd” in the search bar and click “Command Prompt.” Now, type “ipconfig” and press enter. You’ll see your router’s WEB GUI password next to “Default Gateway.” In the example image below; “Default Gateway . . . . . : 192.168.1.1 is the IP address.
How do I find the IP address of my Aztech router?
In MacBook: Type “route -n get default” in Terminal. You’ll see your router’s WEB GUI IP address next to “Gateway.”

How to Reset Aztech Router?

You’ll need your GUI password to change the WiFi password. If you have already changed your Aztech router’s WEB GUI password and don’t remember that password, you’ll need to reset your router.
Attention: After the reset, your router will restore factory settings. All passwords and configurations you have set will be gone. Your internet connection will drop and you’ll need to reconfigure the router.
Aztech router Hard Factory Reset

Important: Your Aztech router should be plugged in and working, and its lights must be on.
  • Find the reset button behind your Aztech router.
  • Use a pin or another sharp-pointed object (like a pen or toothpick) to press and hold on to the reset button for about 10-15 seconds.
  • Your router’s lights will flash.
  • Wait until all of your Aztech router’s lights are on.
  • Congrats! You successfully reset your Aztech router.

How to reset Aztech router?

Default Aztech Router Password List

Model Username / Password IP Address
DSL1000EW(L) admin / admin 192.168.1.1
DSL5005EN admin / admin 192.168.1.1
DSL5008EN admin / admin 192.168.1.1
DSL600EW 192.168.1.1
DSL605EW 192.168.1.1
HW550-3G admin / admin 192.168.2.1
NA8300 10.0.0.1

Last Updated on: 13 March 2022

Leave a Reply