Contents
How to Enter 2Wire Router WEB GUI?
The most commonly used IP to enter the 2Wire WEB GUI is 192.168.1.254. Open a web browser, as shown in the image below.
When the page opens, you’ll need to write your router’s username and password.
⬇
2Wire Router LOGIN
If you haven’t changed your password already, you can find your password on a sticker located under the router or in the user manual. If you cannot find a sticker or the user manual, you might like to take a look at our “Default 2Wire Router Passwords” list.
2Wire Router Username & Passwords
The populer default 2Wire Router Passwords are listed below. There is also another list of the passwords of every 2Wire router model at the bottom of the page.
Changing 2Wire WiFi Password
If your neighbors are using your internet without even asking for permission, you can always put an end to this by simply changing your router’s WiFi password. Periodically changing the password of your wireless connection is significant for your security.
How to Change 2Wire WiFi Password?
- Log into the router
- Click “Wireless Settings”
- SSID is your WiFi name. You can change the name of your router from here.
- SSID Password is your WiFi password. You can change your password from here.
- Your password should have 8 characters.
- Click “Save” after changing your password.
After changing your 2Wire WiFi password, your router will restart. To connect the router, you’ll need to enter your new password on your devices, such as PC or mobile.
I can’t connect to my 2Wire router’s admin interface?
If you receive the error message: “Can’t reach this page,” then you may be trying the wrong IP address.
How do I find the IP address of my 2Wire router?
192.168.1.254 may not be your router’s IP address. To learn your router’s default IP address, you can refer to the label on the bottom of your modem or, if available, the modem’s user manual. If you don’t have either of those, you can try the following steps and learn your router’s default IP address.
The most used IP addresses by 2Wire routers;
- 192.168.1.254
In Windows: Type “cmd” in the search bar and click “Command Prompt.” Now, type “ipconfig” and press enter. You’ll see your router’s WEB GUI password next to “Default Gateway.” In the example image below; “Default Gateway . . . . . : 192.168.1.254 is the IP address.
In MacBook: Type “route -n get default” in Terminal. You’ll see your router’s WEB GUI IP address next to “Gateway.”
How to Reset 2Wire Router?
You’ll need your GUI password to change the WiFi password. If you have already changed your 2Wire router’s WEB GUI password and don’t remember that password, you’ll need to reset your router.
Attention: After the reset, your router will restore factory settings. All passwords and configurations you have set will be gone. Your internet connection will drop and you’ll need to reconfigure the router.
2Wire router Hard Factory Reset
Important: Your 2Wire router should be plugged in and working, and its lights must be on.
- Find the reset button behind your 2Wire router.
- Use a pin or another sharp-pointed object (like a pen or toothpick) to press and hold on to the reset button for about 10-15 seconds.
- Your router’s lights will flash.
- Wait until all of your 2Wire router’s lights are on.
- Congrats! You successfully reset your 2Wire router.
Default 2Wire Router Password List
| Model | Username / Password | IP Address |
|---|---|---|
| 2700HG-B | 192.168.1.254 | |
| 2700HGV | – | |
| 2701HG-B | 192.168.1.254 | |
| 3600HGV | 192.168.1.254 | |
| 3800HGV-B | 192.168.1.254 | |
| 3801HGV | 192.168.1.254 | |
| 5012NV | 192.168.1.254 | |
| 5012NV-002 | 192.168.1.254 | |
| 5012NV-2 | 192.168.1.254 |
Last Updated on: 13 March 2022